Arducam VGA Camera for Raspberry Pi Pico, HM0360 Camera Module

Description

Arducam HM0360 is a low-cost camera module built specifically for Raspberry Pi Pico and all available RP2040 dev boards.

The HM0360 uses Himax Imaging’s advanced 3.6µ deep diode pixel and proprietary readout design to achieve superior low light performance while consuming only 140µA in QVGA 2FPS and approximately 7mA in VGA 60 frames per second read out mode.

To reduce camera system latency and power consumption, the HM0360 features on-chip self-oscillator, real-time clock, fast initialization, <2ms frame trigger, context switching and instant frame update. The sensor provides several monitoring options with programmable interrupt thereby allowing the host processor to be placed in low power standby until notified by the sensor. SPECS

– Max. Resolution: 640 x 480

– Pixel Size / Technology: 3.6 µm x 3.6 µm / BSI

– Diagonal (Optical Format): 2.88 mm (1/6″)

– Color Filter Array: Bayer, Monochrome

– Frame Rate @ 24MHz: QQVGA 1FPS to VGA 60FPS

– Readout Modes: Full (VGA), Bin2 (Mono) / Sub2, Bin4 (Mono) / Sub4, Fast ROI

– S/N Ratiomax: 45.5dB

– Dynamic Range (1x): 85dB

– Sensitivity: 5.5 V / Lux-sec @ 530nm, 15 V / (uW-cm-2 sec) @ 850nm

– CRA (maximum): 35.74º

– Supply Voltage: Analog 2.8V, Digital 1.2V (1.8V LDO option), I/O 1.8 – 3.0V.

– Reference Clock (EXTCLK): 6 – 24 MHz

– Internal Oscillator: Yes

– Serial Interface: I²C (1MHz max., single/burst)

– Current Consumption (8b parallel, >5pF load): QVGA (S2) 2FPS 140 µA, QVGA 60FPS 3.2 mA, VGA 60FPS 7 mA

Package Contents

1 x Arducam HM0360 camera module

8 x jump wires