12V Car Alarm Security System, Universal Car Alarm System Engine Push Button Start Stop Lock Anti Theft

Description

Specification:

Condition: Brand New

Working voltage: DC voltage DC=12V, 24V power supply is not supported temporarily.

Standby current: 8mA (note: standby for up to 2 months continuously)

Key display: blue light (car turn off: no light; car start: long time light; car stereo turn on: flashing light)

Package Box Size: 17 x 14.5 x 5cm / 6.7 x 5.7 x 2in 

Package List:

1 x Induction Coil

1 x Wiring Harness 

1 x Main Unit 

1 x Start Button  

2 x ID Card

Installation Note:

1. When the vehicle has a steering wheel lock, the key is inserted into the keyhole and punched in the ACC gear to unlock the steering wheel, and the ignition plug of the original car is removed to prevent the original car’s audio power consumption.

2. When the original vehicle has an anti-theft chip, take out the anti-theft chip of the original vehicle and stick it to the area where the original vehicle can be scanned, otherwise it may cause to the start-up failure.

3, Because the base of the start button is metal material, when pasting and putting, if interference with the original car’s anti-theft chip, then choose other areas to put or pad high processing.

4. The output of this product is made of 5 lines, i. e., 12V red wire connection original fire line, ACC line of orange wire connection original car (usually in 1 gear), ON1 power line of white wire connection original car (usually in 2 gear), starting point fire line of yellow wire connection original car (this line is powered at the start moment, no power after start-up), brown wire connection of the original car ON2 power supply line (this line when the key hit ON gear when there is electricity, and in the start of the moment no electricity, when start-up, there is electricity, installation should be careful to judge).