Sinefine PCI-E to USB 3.2 Expansion Card,3.2 gen2 10Gpbs (3X USB C, 1x USB A, 1x USB Type E A Key), USB C PCI Express Card, A-Key 20 Pin Header for Type C Front Panel Mount Adapter

Description

Specification:

Extend Ports: 3 USB Type C 3.2, 1 USB A 2.0, 1 USB Type E

Host Interface: PCI Express (PCI-E 3.0/2.0/1.0)

Data Transfer Rate: USB 3.2 Up to 10 Gbps

Output: 5V/3A MAX (each USB port)

Note:

1. Not equipped with a Low-profile bracket. The overall size of the PCI-E card is 3.43(in) in length and 3.15 (in) in height, The height of the iron sheet is 0.71 (in), It doesn’t apply to small computers and servers chassis, like 1U and 2U.

2. Install the driver before inserting the USB card.In addition, for some special motherboards Windows 10/11 System there is no way to recognize the card, Please contact your motherboard vendor for additional USB drivers.

3. Make sure PCs motherboard have empty PCIE slot for PCIE USB cards.

4. Make sure the power has been disconnected before installation

5. Do not use in a humid environment, otherwise it will affect the connection of the device.

Frequently asked questions:

Why 10Gbps speed not achieved?

1.Please contact the manufacturer of the motherboard and check the following information.

1). PCI-E slot protocol requires PCIe version 3.0 or higher.

2). The lanes assigned to the PCI-E interface are x4 or higher (The lanes assigned to the PCI-E interface are x4 or higher. (x1,x2 channels are also available, but the speed will not be reached).

2.When using a USB pcie card, USB devices have performance limitations on the throughput/performance of the card’s data transfer. This depends on the USB protocol and cable material of the end device.you can check if your external USB device supports 10Gbps bandwidth by consulting your external USB device vendor.

Why is this USB 3.2 port detected as USB 3.1 by the computer system?

According to the latest USB-IF standard: the USB-A ports on this card is USB 3.2 Gen 2×1 = USB